進口捷*防爆電磁頭系列，asco防爆電磁頭
如果您對該產品感興趣的話,可以
產品名稱: 進口捷*防爆電磁頭系列，asco防爆電磁頭
產品型號: EFHT8344G076MO
產品展商: ASCO
產品文檔: 無相關文檔
簡單介紹
進口捷*防爆電磁頭系列，asco防爆電磁頭
選擇電磁閥前綴（組合）。
請參閱本頁上的前綴表
并尊重指示的功率級別，
冷電保持值和
第1頁提到的“T”分類。
注意：確保環境溫度
不超過允許的閥門溫度
特點。
示例：WPIS
60°C環境溫度
低功率（LP）0.4W
進口捷*防爆電磁頭系列，asco防爆電磁頭
進口捷*防爆電磁頭系列，asco防爆電磁頭
的詳細介紹
進口捷*防爆電磁頭系列，asco防爆電磁頭
上海乾拓貿易有限公司
企業QQ:
手機；（微信）
郵箱:@163.com
傳真；
聯系人；玲
上海市嘉定區江橋鎮嘉涌路99弄6號713室
FEATURES
● Explosion proof operator, intended for use in potentially explosive atmospheres,
according to Directive ATEX 94/9/EC
● EC type examination certificate (KEMA 98 ATEX 2544) and IECEx certificate
(IECEx KEM 08.0017) are in compliance with the International and European
Standards IEC and EN: 60079-0, 60079-11, 60079-26, 61241-0 and 61241-11
● This highly efficient solenoid operates at very low power level (0.4W)
● The continous duty class F polypropylene moulded spade plug connector coil
contains moulded in solid state components for switch-off peak voltage suppression,
independent polarity connection and electronic enhancement
● Enclosure provided with integral strain relief for cables with an o.d. from
7 to 12 mm
選擇電磁閥前綴（組合）。
請參閱本頁上的前綴表
并尊重指示的功率級別，
冷電保持值和
第1頁提到的“T”分類。
注意：確保環境溫度
不超過允許的閥門溫度
特點。
示例：WPIS
60°C環境溫度
低功率（LP）0.4W
II 1G Ex ia IIC T6
II 2D IP67 T85°C
步驟4
終目錄/訂貨號。
例：
WPIS B314A315 U 24V DC
● Ingress protection degree IP67
● A wide range of valves can be supplied with the operator
minimum current of 28 mA is necessary for optimal
performance. The minimum series resistance required
is 200 Ohms.The nominal value of the resistance of
the coil is 158 Ohms. (at 20 degrees C)
The minimum allowable ambient temperature is -40°C for the operator.
Select the requested "T" classification from the temperature classification tables
(AC or DC), respecting the maximum ambient temperature and cold (20°C)
electrical holding power values.
STEP 3
Select solenoid prefix (combination).
Refer to the prefix table on this page
and respect the indicated power level,
cold electrical holding values and
"T" classification mentioned on page 1.
NOTE: Make sure that the ambient temperature
does not exceed the allowable valve temperature
characteristics.
Example: WPIS
60°C ambient
Low Power (LP) 0.4W
II 1G Ex ia IIC T6
II 2D IP67 T85°C
STEP 4
Final catalogue / ordering number.
Example:
WPIS B314A315 U 24V DC
進口捷*防爆電磁頭系列，asco防爆電磁頭
